CustomShop Hypemachine - Carbon Fibre - NAMM RELEASE
SKU:
CustomShop Hypemachine - Carbo
A$5,490.00
A$5,490.00
HYPEMACHINE MULTISCALE 7 STRING
CustomShop (Australian hand made collection)
Body: Swamp Ash, chambered
Top: Carbon Fibre
Neck: Mahogany (three piece laminated, carbon fibre between laminations)
Fretboard: Richlite dual colour
Inlay: Mother of Pearl
Binding: n/a
Fretwire: Jumbo Stainless Steel
Bridge: Hipshot Custom
Machineheads: Hipshot locking
Nut: Bone
Neck joint: Machine screw with inserts, bolt on.
Neck profile: Thin D 19-21mm
Number of strings: 7
Scale length: 25.5" - 27.8"
Finish: Gloss over carbon fibre, with black 'worn satin' "thinskin" on rear.
Pickups: Nunchucker A8 in the bridge, with a De La Creme A5 in the neck
Controls: 500k Volume (with user adjustable treble bleed), Switchcraft 3 way toggle, and 500k Push/Pull with Orange Drop capacitor.
--
We have previously made a carbon fibre guitars for NAMM in 2016 (SX model), and had a lot of fun with it, so why not do it again?
The top is 2mm thick 1x1 weave pure carbon fibre. It is bonded to a Swamp Ash body with our 'heavy chambering' pattern for extra weight relief and mid range. The Mahogany neck pieces were chosen from our collection for their ultra light weight, and then bonded with a layer of carbon fibre between each of the three laminations for extra strength. Whilst these carbon fibre are only thin, they do considerably add to the overall strength of the neck shaft. This allowed us to shape the neck thinner than would be normally acceptable for a Mahogany neck.
For the finish, we painted the body with a matte clear over black stained Swamp Ash, then mildly buffed the finish to give a unique look. The finish is thin, allowing the surface pores of the body wood to show through.
Richlite is a new composite material which is not only strong, but smooth feeling. Being a composite, it is impervious to humidity, moisture, and any weather effects that usually cause neck movement issues with natural timber fretboards. The material has been layered, with black and grey composite sheets, to create the striking look you see in the photos.
On the rear, machined alloy back plates identify this as a handmade CustomShop instrument.
CustomShop (Australian hand made collection)
Body: Swamp Ash, chambered
Top: Carbon Fibre
Neck: Mahogany (three piece laminated, carbon fibre between laminations)
Fretboard: Richlite dual colour
Inlay: Mother of Pearl
Binding: n/a
Fretwire: Jumbo Stainless Steel
Bridge: Hipshot Custom
Machineheads: Hipshot locking
Nut: Bone
Neck joint: Machine screw with inserts, bolt on.
Neck profile: Thin D 19-21mm
Number of strings: 7
Scale length: 25.5" - 27.8"
Finish: Gloss over carbon fibre, with black 'worn satin' "thinskin" on rear.
Pickups: Nunchucker A8 in the bridge, with a De La Creme A5 in the neck
Controls: 500k Volume (with user adjustable treble bleed), Switchcraft 3 way toggle, and 500k Push/Pull with Orange Drop capacitor.
--
We have previously made a carbon fibre guitars for NAMM in 2016 (SX model), and had a lot of fun with it, so why not do it again?
The top is 2mm thick 1x1 weave pure carbon fibre. It is bonded to a Swamp Ash body with our 'heavy chambering' pattern for extra weight relief and mid range. The Mahogany neck pieces were chosen from our collection for their ultra light weight, and then bonded with a layer of carbon fibre between each of the three laminations for extra strength. Whilst these carbon fibre are only thin, they do considerably add to the overall strength of the neck shaft. This allowed us to shape the neck thinner than would be normally acceptable for a Mahogany neck.
For the finish, we painted the body with a matte clear over black stained Swamp Ash, then mildly buffed the finish to give a unique look. The finish is thin, allowing the surface pores of the body wood to show through.
Richlite is a new composite material which is not only strong, but smooth feeling. Being a composite, it is impervious to humidity, moisture, and any weather effects that usually cause neck movement issues with natural timber fretboards. The material has been layered, with black and grey composite sheets, to create the striking look you see in the photos.
On the rear, machined alloy back plates identify this as a handmade CustomShop instrument.
1 available